1. Frame structure: whether a cutting or cutting, two or three times should be input energy, cutting factory domestic research on the frame structure, concrete from cutting factory, design a more reasonable cutting machine, the designed personalized slitting machine, makes cutting different materials on the structure more detailed, the next round of the competition of the international market, to the membrane enterprises with better weapons, but also for their own businesses to find out the blue ocean.

2. Automatic control part: the current domestic production by cutting machine automation level still stays in the middle and lower level, although the internal control components use has been very popular, price is relatively cheap, but in the use of the depth of the cutting factory domestic level lags far behind developed abroad, especially on the control system and the structure of the cutting machine and cutting the material on the lack of the combination of organic.

3. Manufacturing: this is a common problem for China's manufacturing industry. Any mechanical equipment requires precision in manufacturing in addition to reasonable design, which China's manufacturing industry lacks.

The cutting machine mainly cuts the large drum into products of different widths and can check product quality. Its main features are as follows:

1. Photoelectric rectification of unwinding with high precision; There are two: manual and automatic

2. There can be two ways of winding: surface rolling and center rolling;

3. Automatic tension is adopted for unwinding tension;

4. Cutting the round knife with reliable quality and convenient adjustment;

5. Surface center coiling is adopted, with uniform and stable coiling quality;

6. Stop the machine at fixed length and measure the length automatically;

7. With edge cutting device, the side material is discharged by the fan;

(1) white steel knife, also known as high-speed steel knife, has good toughness and high cutting efficiency, but poor cutting sharpness. It is necessary to adjust the rotation speed to make up for the lack of sharpness in the cutting process. This blade is mainly used for cutting PET material, PE material and other materials with high hardness. Relatively cheap, more practical, is a common tool.

(2) tungsten steel cutter, which has good brittleness and sharpness, is generally used for cutting soft materials like double-sided adhesive. The cutting precision of the cutter is good, and there are few burrs and silk edges in the cutting process. However, the tool is easy to collapse for the harder material. And cutter cost relatively more expensive, general manufacturers only used to cut tape, PE film, American paper and other texture of relatively soft materials.